Thuis > Product List > DC -bronsysteem > 200V DC Source System > Schakelmodus voedingontwerp tot 40 kW

Schakelmodus voedingontwerp tot 40 kW

  • Beschrijving
Overview
Productkenmerken

ModelSPS200VDC40000W-2-27

merkAPM

Plaats Van HerkomstChina

Input Voltage190~265VAC

Input Frequency47~63Hz

Input Power Max47.5KW

Power Factor≥0.98

Output Voltage Range0~200V

Output Current Range0~240A

Output Power Range0~40000W

Height27U

Warranty2 years

Leveringscapaciteit en aanvullende infor...

verpakkingendozen

produktiviteitother

vervoerAir

Plaats van herkomstCHINA

Ondersteuning overother

CertificaatCE

GS-code8504401990

HavenDHL

betaling TypeT/T

IncotermEXW

Verpakking & Levering
Verkoopeenheden:
Others
Pakkettype:
dozen
Afbeeldingsvoorbeeld:

Product Introductie:

Het ontwerp van de schakelmodel voeding is uitgerust met veel functies, zoals lijstbewerkingsgolfvormtesten, klacht met SCPI -protocol enz. Dit 20U -reksysteem is ontworpen voor ultieme flexibiliteit en configuratie bij het bieden van de ideale power -invoeroplossing voor testomvormers, laders, batterijen, adapters en stroom elektronische componenten. APM Tech -voeding kan een variabel spanningsbereik voldoen. Dit systeem omvat spanningsbereik tot 200V en het huidige bereik tot 240A. Dus de vereiste van 90V DC -voeding kan worden behandeld .


Applicatiegebied :

Deze serie is van toepassing op meerdere sectoren zoals elektrische, verlichting- en luchtvaartsectoren en kan ook worden toegepast op de productietest van Enterprise.

Er zijn meer modellen, 40V DC -bronsysteem, 75V DC -bronsysteem, 120V DC -bronsysteem, 150V DC -bronsysteem, 600V DC -bronsysteem, 800V DC -bronsysteem voor uw referentie.


Producteigenschappen:

met nauwkeurige spanning en stroommeetmogelijkheden.
Gecodeerde knop, multifunctionele toetsenbord.
Standaard RS232/RS485/USB -communicatie -interfaces, LAN en GPIB zijn optioneel.
Remote Sensing Lijnspanningsvalcompensatie.
Richt de lijst met lijst WaveForm -bewerkingsfunctie uit.
Gebruik de standaardopdrachten voor het communicatieprotocol van de programmeerbare instrumentatie (SCPI).
● hebben CE -certificering verkregen.


Technische specificatie:

 ltem  MODEL  SYS200VDC40000W
 INPUT
1  Voltage  190~265VAC
2  Frequency  47~63Hz
3  Phase  3 Phase,4Wire+Groud/Y Connect
4  Max.Current  250A
5  Input Power Max  47.5kW
6  Power Factor 
at 220VAC Input ,Full Load
 0.98 Min. Active PFC
7  Efficiency  >88%  Max @Full Load and Units=4kW Model
 OUTNPUT (Parallel Mode)
8  Output Voltage  0~200V
9  Output Current  0~240A
10  Output Power  40kW Max
11  Load Regulation  Voltage  600mV
12  Current  240mA
13  Line Regulation  Voltage  0.02%F.S.+30mV
14  Current  0.02%F.S.+15mA
15  Voltage Setting  Range  0~200V
16  Resolution  1mV
17  Accuracy  0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
18  Current Setting  Range  0~240A
19  Resolution  10mA
20  Accuracy  0.1%+0.10%F.S
21  Ripple  Voltage  300mVp-p/60mVrms
22  Current  250mA(Full Range),100mA(TYP Value)
 MEASUREMENT (Parallel Mode)
23  Voltage Setting  Range  0~200V
24  Resolution  1mV
25  Accuracy

 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc

26  Current Setting  Range  0~240A
27  Resolution  10mA
28  Accuracy  0.1%+0.10%F.S
 Extra Function
29  Remote Sense  Range  5V(DC), Max. Total power less than rated power
30  Comm. Respondence.  50ms
31  Graphic Display  VFD
32  Operation Key Feature  Soft key,Numberic key,Rotary Knob
33  Rack mount Handles  Yes
34  FAN  Temperature Control
35  Protection Circuits  OCP, OVP, OPP, OTP,FAN
36  Interface  USB, RS485, RS232, LAN(Standard); GPIB(Option)
 Remote Control Input/Output signal characteristics
37  Remote Input signal  Not Support
38  Remote output signal  Not Support
 Environmental
39  Operating Temperature  0°C~40°C
40  Storage  Temperature  -20°C~70°C
41  Altitude  2000m
42  Relative Humidity  10%~90%, non-condensing
43  Temperature Coefficient  100ppm/°C at Voltage, 300ppm/°C at Current
 Mechanical
44  Dimensions(W*H*D)  600.0*1524.0*700.0 mm
45  Package Dimensions(W*H*D)  720.0*1700.0*820.0 mm
46  Unit Net Weight  120.0kg+15kg*N(REF)
47  Accessories Weight  0.4kg
48  Shipping Weight  200.0kg+15kg*N(REF)
 Regulatory Compliance
49  CE Mark  Installation Overvltage Category II;Class II equipment;indoor use only.

*FS vertegenwoordigt de maximale waarde van het uitvoerbereik.
* N staat voor het aantal geïnstalleerde voedingseenheden en N is groter dan 1.


Product Categorie : DC -bronsysteem > 200V DC Source System

Thuis > Product List > DC -bronsysteem > 200V DC Source System > Schakelmodus voedingontwerp tot 40 kW
E-mail naar dit bedrijf
  • *Onderwerp:
  • *Naar:
    Ms. Emily Cui
  • *E-mail:
  • *bericht:
    Uw bericht moet tussen 20-8000 tekens
Klik Hier om onderzoek te sturen
*
*

Huis

Product

Phone

Over ons

onderzoek

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

verzenden